Spread: When trading CFDs, you must pay the spread, which is the difference between the buy and sell price. You enter a buy trade using the buy price quoted and exit using the sell price. The narrower the spread, the less the price needs to move in your favor before you start to make a profit, or if the price moves against you, a loss. We offer consistently competitive spreads.
 
Holding costs: at the end of each trading day (at 5pm New York time), any positions open in your account may be subject to a charge called a ‘holding cost’. The holding cost can be positive or negative depending on the direction of your position and the applicable holding rate.

We set a price for a contract based on the underlying market, which you can buy or sell.
 
With each market, you are given a ‘buy’ and ‘sell’ price either side of the underlying market price. You can trade on the market to go up (known as ‘buying’ or ‘going long’), or you can trade on it to go down (known as ‘selling’ or ‘going short’).
 
Once you open your trade, you’ll receive a confirmation message to show that it has been accepted. Trades are occasionally rejected, but the vast majority go through without any problems. Check the details on your confirmation message carefully to make sure the trade is as you intended.
 
Your open trade will now appear in the ‘open positions’ pane in our trading platform. All the time, your position is open, you’ll be able to see your profit or loss by checking the profit/loss column.
 
When you decide to close your position and collect your profits, to do this, you sell the same number of contracts as you bought initially.
 
The simplest way of doing this is to bring up a ‘close position’ screen. When you click on ‘sell’, you’ll receive another confirmation to let you know that you’ve sold that number of contracts.

See full risk warning

See full risk warning

Unlike some other forms of trading, when it comes to CFDs traders using the GCMAsia platform, traders can hedge their trades, which can be beneficial when it comes to limiting potential losses.

For example, let’s say that I currently have an open position on Dollar/Yen – I ‘went long’ buying the Dollar in the expectation that USD would strengthen against the Japanese currency. However, I’m now having second thoughts – not enough to make me want to close my trade, but sufficient doubt to make me slightly uncertain that my hoped-for currency strengthening will occur.

In other forms of trading, I would have two choices; close the trade now or keep the deal open and cope with the uncertainty. However, with a CFD, I can simultaneously open another Dollar/Yen position in which I short the Dollar – going the opposite way to my first trade, which is still open. Traders should keep in mind that CFDs can only be hedged using the GCMAsia platform.

If the currency pair subsequently moves the other way to my original trade – with the Dollar falling against the Yen – I’ll still be able to salvage something from the situation, because my hedge will then take effect.

If you have already invested in an existing portfolio of physical shares with another broker and you think they may lose some of their value over the short term, you can hedge your physical shares using CFDs. By short selling the same shares as CFDs, you can try and make a profit from the short-term downtrend to offset any loss from your existing portfolio.
 
For example, say you hold £5000 worth of physical ABC Corp shares in your portfolio; you could hold a short position or short sell the equivalent value of ABC Corp with CFDs. Then, if ABC Corp’s share price falls in the underlying market, the loss in value of your physical share portfolio could potentially be offset by the profit made on your short selling CFD trade. You could then close out your CFD trade to secure your profit as the short-term downtrend comes to an end, and the value of your physical shares starts to rise again.
 
Using CFDs to hedge physical share portfolios is a popular strategy for many investors, especially in volatile markets.
 
CFD Trade Example
 
So, how exactly does one trade a CFD? Let’s take a look at an example of a CFD trade using the popularly traded ‘Germany 30’ index as an example;
 
In the following theoretical example, ‘Germany 30’ is currently trading at a level of 9610.5/9611.5, giving me the option of selling the German index at the 9610.5 level or buying at 9611.5. I decide to buy £5 of the ‘Germany 30’ at that 9611.5 level, and my nominal risk in this instance would be worked out as follows;
 
(Level I’m buying at x the amount I’m buying)

So, in this case, the nominal risk would be;

9611.5 x 5 = 48057.5

£48,057.50 is the maximum amount of money I would stand to lose if the ‘Germany 30’ dropped from its current 9611.5 level to zero.
 
CFDs and Leverage
 
As a form of trading involving leverage, instead of having to put down the cost of the trade-in its entirety (at 9611.5 x 5 that would cost £48,057.50, the same as my nominal risk) I only need to put in a small percentage of the overall value to initiate the trade. We work this out as a percentage of the nominal risk – if the margin is 1%, then 48,057.50/100 = 480.575. Therefore, rounding upwards by a penny, £480.58 is the amount needed to initiate the trade.
 
If, however, I had decided to sell £5 of ‘Germany 30’ instead of buying it, the price of my trade would be as follows;

9610.5 x 5 = £48,052.5

The amount I would need to put into my trade would, therefore, be 1% of that, meaning £480.53

Traders are advised to remember that increasing leverage increases risk.
 
CFD Trading Results
 
Going back to the scenario where I bought £5 rather than sold, if the ‘Germany 30’ subsequently moves up to a level of 9613.5/9614.5, and I decided that this would be a good point for me to exit the trade, I would work out the profit on my trade as follows; the amount I bought x the number of points that the trade has moved in my favor.
 
In this case, my profit would, therefore, be 5 x 2, meaning that I would make a profit of £10 on the trade.
 
Alternatively, had I sold £5 of the ‘Germany 30’ at the 9610.5 level and then closed the trade at that 9613.5/9614.5 level, my loss would be 5 x 4, seeing as the price of my closing trade would be four points higher than when I opened it. In this case, my loss on the trade would be £20.
 
If however, the ‘Germany 30’ fell from 9610.5/9611.5 to 9608.5/9609.5 – had I bought £5 of the ‘Germany 30’ at the original level my loss would be calculated as follows; the amount I bought x the number of points that the trade has moved against me.
 
In this instance, my loss would be 5 x 3, meaning that I would make a loss of £15. On the other hand, if I had sold £5 of ‘Germany 30’ at the original level, then my profit would be 5 x 1, giving me a profit of £5.

Forex swap is the overnight charge/credit amount for an open position.
The amount reflects the interest rate difference between the central banks (based on market rates and spreads) of the two assets involved.
 
Swaps are credited or debited once for each day of the week, with the exception of Wednesday, on which they are credited or debited 3 times their regular amount.
 
Swap charges are released on a weekly basis by the financial institutes which GCMAsia works with, and are calculated and determined according to various risk management criteria and market conditions.

The swap premium is calculated in the following manner:
 
Pip Value (Depending On Trade Size) * swap rate in Pips * Number of Nights = Swap charge/credit
 
Forex Example:
You open a short position (Sell) on EUR/USD for 1 lot with an account based in USD:
 
1 Lot = 100,000
1 Pip Value = 10 USD
Swap Rate = -3.2839 Points (equivalent to 0.32839 Pips)
Number of Nights = 1
Swap Premium: 10 * 0.32839 * 1 = 3.2839 USD
 
CFDs Example:
You open a long position (Buy) on Crude oil for 1 lot (1,000 barrels) with an account based in USD:
 
Swap Rate = -0.3807
1 Cent Value = 10 USD
Number of Nights = 1
Swap Premium: 10 * -0.3807 * 1 = -3.807 USD

A trader has an open SHORT or SELL position of 1,000 Crude Oil Barrels.

The current contract closing quote is 45.50 (Bid)/45.54 (Ask), and the new contract quote is 46.50 (Bid)/46.54 (Ask).

The difference is +1 USD, i.e., the new contract is HIGHER than the old contract.

To rollover the open short position, GCMAsia automatically closes the old contract at the ask price of (since the client has a SELL position, it will be closed in the ask price, which is 45.54), and simultaneously re-opens at the new contract bid price of 46.50.

In this example, the client is credited with the sum of 960 USD, reflecting the price difference between the two contracts. It means that the customer’s charge is equivalent to the spread of the Bid and the Ask (i.e., the new contract will be opened at the Bid price, which is 46.5).

The calculation is: (46.5 – 45.54) * 1,000 = 960 USD

(Old Contract Closing Ask Price – New Contract Opening Bid) * Amount = Rollover Charge/Credit)

If you do not wish to incur rollover adjustment costs, simply close any open positions before the scheduled rollover date. These dates may be found on the Rollover Rates page of our website. Clients are also advised of upcoming rollovers via notifications on the GCMAsia Pro trading platform.

Rollover rates are provided and updated directly to our website. To view the most recent rollovers and an annual schedule of dates for rollovers, please click here.
 
Please note, rollover charges/credits are also reflected inside the Swap column of our financial instruments’ Trading Conditions (in addition to an already existing Swap charges).